West section of Jinping Avenue,Dangyang,Hubei province,China

All Categories
EN
Tel

+86-18668608946

E-mail

aw0024@szautoware.com

Opening Time

Mon -Sat: 7:00 - 17:00

Home>FAQ

China Coal Tuke 1500 m3 oil vapor recovery system

Recently, with the completion of various inspections, the "China Coal Tuke 1500 m3 oil and gas recovery equipment" project designed and manufactured by our company has been successfully concluded, and it is ready to set off for a new home in Ordos, Inner Mongolia, to appear on the China Coal Tuke site.

1.jpg2.jpgTo be grateful for the hard work of all the design colleagues in the chemical equipment department, we have engraved the 60 days and nights that the front-line employees of the oil and gas recovery workshop were not afraid of the cold, not afraid of hardship, and hard work. Beautiful memory. They specially helped the "1500 cubic meter oil and gas recovery device", the "beautiful protagonist" who will soon be married to the North, dress up: put on big red flowers, tied up balloons and ribbons. A colleague said excitedly: "It's like marrying a girl, so beautiful!" Yes! We just want this set of self-designed, produced, and manufactured oil and gas recovery devices to marry other countries, let customers feel our Passion and sense of responsibility. Before leaving, the colleagues reluctantly took a photo with her! I hope she will carry forward the spirit of the company while contributing her strength after she goes to a foreign land.

Project Introduction

The equipment is L33000mm*W2900mm *H3200mm. The designed processing capacity is 1500 cubic meters. It adopts advanced "absorption + condensation + adsorption" technology, which can provide customers with intuitive oil and gas recovery effects and benefits, and has good safety and operation. Simple and other advantages.

3.jpgDevice core components in the skid-mounted

4.jpgThe skid frame of the vapor recovery device is assembled

4.jpg5.jpgThe crane is lifting the equipment out of the workshop

6.jpgProtecting film for vapor recovery cover

7.jpgWaiting for departure after loading

9.jpgThe equipment is being debugged and installed on the project site